<<< Previous topic - Next topic >>> |
|
Author |
Message |
Iulian Iliescu
Joined: 01 Nov 2006 Posts: 3
|
Posted: 01.11.2006, 10:17 Post subject: flash disk support |
|
|
My DNP/5280 has by default only mdbblock2 mounted as /home. I tryed to mount other devices to different mount points (some successfully, other not) and the final result was that my system doesn't boot anymore. I can solve this problem if a rewrite the linux image.
Does someone know why only mdbblock2 is mounted and which blocks can i mount safetly?
I was expected to have a 8 Mb flash disk, but instead i found only a ~760 Kb flask disk.
Thanks,
Iulian |
|
Back to top |
|
|
mha
Joined: 05 May 2006 Posts: 28
|
Posted: 02.11.2006, 15:34 Post subject: |
|
|
Hello,
by default only mtdblock2 mounted as /home (speed issue).
MTD partitions on "Physically mapped flash of DNP5280":
mtd0: 0x00000000-0x00050000 : "dBug"
mtd1: 0x00050000-0x00300000 : "uClinux"
mtd2: 0x00300000-0x00400000 : "spare 1" (automount)
mtd3: 0x00400000-0x00800000 : "spare 2" (useable - manual mount)
Try...
Filesystem 1k-blocks Used Available Use% Mounted on
rootfs 1012 1012 0 100% /
/dev/rom0 1012 1012 0 100% /
/dev/ram1 987 7 980 1% /var
/dev/mtdblock2 768 396 372 52% /home
/dev/mtdblock3 3840 0 3840 0% /mnt
Marco Hasewinkel |
|
Back to top |
|
|
|